InfoLink Consulting Co., Ltd.

Solar Market Trends

How coronavirus could impact the solar industry supply chain: An analysis

February 5, 2020 PV InfoLink

CN EN
To read the full content of this analysis, please reach us to become a member of PV InfoLink.
China’s National Energy Administration has issued an urgent notice on Jan. 30, requesting the electricity sector to make timely adjustment to construction plans and re-establish a reasonable timeframe. It also forbids them to rush construction to meet deadlines.

Although the government hasn’t yet decided whether to postpone the installation deadline and for how long it should be extended, it’s certain that the timing of demand in China will be delayed to Q2 and Q3 because of the delayed opening.  

On overseas demand side, the inventory draw has not yet slowed for now. However, supply is running a bit short because of suspended production and logistics hiccups. In fact, overseas markets have seen undersupply of modules in early February. India, which has high demand for multi-Si products, will experience significant shortage.

Overall, PV InfoLink projects that the anticipated demand in Q1 will delay to Q2 and Q3 this year. Nevertheless, the 2020 demand level will sit at 134.3 GW as predicted earlier.
 
module demand forecast

The postponed opening in China will cause demand from tendered projects in Q1 to delay.
A delay will occur in overseas demand due to a shortage of modules caused by logistics hiccups.
 

Major impacts on supply amid coronavirus outbreak:

In addition to the direct impact caused by suspended production, shutdown of logistics systems is the biggest issue facing the solar industry, which now suffers from serious shortage of materials for modules, such as junction box and aluminum frames.   
 
The outbreak has delayed workers’ return to work. Moreover, preventive measure imposed on some regions requires workers to conduct self-quarantine for 7-14 days after resuming work. That will slow down the ramp-up in capacity utilization among manufacturers. It’s expected that most Tier 1 module manufacturers will be operating at 40-80% of utilization rate until the end of February.
 
Some manufacturers are unable to receive payments by Feb. 10 due to delays in market opening. Consequently, small-sized manufacturers and those run short of capital will struggle financially.
 
In response to the epidemic, public sectors in Suzhou and Shanghai have launched policy measures to support affected companies. Local governments in other provinces are expected to follow suit to help minimize the impact of coronavirus on companies

Impacts on the solar supply chain:


Polysilicon segment

Polysilicon producers wouldn’t reduce utilization rates unless they undergo equipment maintenance at a large scale, so the overall utilization rates have maintained high. However, some polysilicon manufacturers may have to reduce utilization rate now amid shortage of polysilicon powder caused by logistics and labor issues.  

Polysilicon powder shortage, coupled with potential increase in delivery costs, make it highly likely for polysilicon prices for mono-Si and multi-Si wafer to increase. It appears that polysilicon prices for mono- and multi-Si wafers will climb by RMB 1/kg. Yet, their changes depend on how long the coronavirus epidemic is going to last. 


Wafer segment

Multi-Si wafer
Production of multi-Si wafer suffers more from the outbreak because most Chinese multi-Si wafer manufacturers are based in Jiangsu province.

Since Q4 2019, multi-Si wafer segment has been experiencing flagging demand. Consequently, wafer prices drop rapidly, causing some multi-Si producers to close production ahead of time before the Lunar New Year. In the face of coronavirus epidemic, supply of multi-Si wafers will decrease further, and prices will thus remain stable or even rise slightly. 

Mono-Si wafer
Supply of mono-Si wafer has been running short before the Lunar New Year. As the coronavirus spreads through China, some mono-Si wafer manufacturers have reduced utilization rates. It now takes longer time to deliver goods to the customers due to transport restrictions. Overseas markets also saw short supply of mono-Si wafer because China is the largest supplier, and this issue is expected to worsen later. Having said that, large mono-Si wafer manufacturers’ supply is stable, so mono-Si wafer prices are predicted to stay steady for the short term.

Cell segment
Although quite a few manufacturers have suspended production, the overall utilization rates of mono-Si cell makers are high. Moreover, vertically integrated companies have kept their mono-Si cell lines operating at the same utilization rates during the Lunar New Year holiday, so the production volumes are also high. Multi-Si cell makers, in contrast, have closed during the holiday, and they will postpone opening. Therefore, the production of multi-Si cells is low.

Cell segment suffers less shortage of materials than the module segment. For now, mono- and multi-Si cell prices will remain stable because the situation of logistics and the supply and demand across the supply chain is unclear. Further information on the states of supply chain will be updated after work resumes.
 
Module segment
Jiangsu and Zhejiang provinces house large volume of module capacity. Quite a few Tier-1 module manufacturers based on these two provinces have suspended production or operated at a low utilization rate. As workers are requested to conduct self-quarantine after returning to work, the overall production in February will remain low even if China resumes work on Feb. 10 as scheduled. The global module production in February is predicted at 7.5-8 GW. If the logistics issue continues, the production volume might be slightly lower than the predicted level, which is significant lower than the average 10-10.9 GW over the past months.

Module segment, which suffers more severe issues of logistics and production than other segments, is experiencing serious shortage of junction box and aluminum frames. Therefore, it’s not likely to reach the expected utilization rates after market opens. 
 
On the demand side, some module manufacturers are unable to deliver goods to their overseas customers after the global supply chain operations are disrupted. Normally, it’s difficult to adjust prices after modules are shipped, but the coronavirus outbreak could drive up retail prices slightly overseas. 

Join Us

This article is only available to subscribers. Sign up now to get passes for all regions.

Member Login

Account

Password

Forgot your password?Click here

Contact

The article is made available to members of InfoLink only. Register immediately to get full access to analysis and reports provided by InfoLink.

Contact now
© 2019 PV InfoLink. All rights reserved.   Webdesign-GRNET